Form loops and curves with these high quality pliers.  Used to round edges of Beadalon Remembrance Memory Wire or to loop wire for beading and wire wrapping designs.  Box-joint construction keeps rounded tips aligned and increases leverage.  

Round Nose Pliers 6.20

Designed for opening split rings and making attachments fast and easy.  Hardened steel nose separates rings and keeps them separated while you secure findings.  Spring hinge increases comfort by reducing fatigue.

Split Ring Pliers  9.80.

Top jaw has 3 sizes to help create a wide variety of consistent loop sizes.  The lower jaw is concave to help form round rings/curves in wire.  Box joint construction

Wire Looping Pliers  8.35

Designed for straightening bent wire and also for making sharp bends and ring angles in wire.  Box joint construction

Flat Nose Pliers  6.50

Round nosed pliers combined with side cutters.  Perfect for making rosaries.

Rosary Pliers  7.00

Designed to work with craft wire and for wire wrapping. 

Chain Nose Pliers 6.80 each

Accurately measure the size of your bead easily.  Inches and millimeters measured

Slide Gauge 5.75

6 inch tool is used to wrap tight, consistent twist wire lengths.  Simple one-pull automatic return twists wire quickly into a strand that will not unravel.  Cutting blade in center to cut wire.

Mini Twisting Pliers 15.50

Ideal for forming elaborate loops with wire.  Simply adjust the pegs on the jig base to create patterns of your own or follow the included pattern sheet.  Sturdy 4x5 inch base with aluminum pegs.  Can be used with all gauges of wire

Deluxe thing-a-ma-jig 14.25

Inexpensive entry level tool that works best with small gauge wire (20-28 gauge).  3x4 inch plastic  jig with plastic pegs.

Beginner's thing-a-ma-jig 6.00

Miniature steel anvil is 1 1/2 inch by 4 1/3 inch by 1 1/5 inch.  It's great for forming wires.  It has one round horn and one flat horn with a hole  for riveting and bending.   It features a large flat working surface for chasing and shaping wire, bending corners and flattening wire to harden it.  Great for making flatted hook and eye clasps.

Anvil 12.00

Wire twister

Twist 2 to 5 strands of wire together at one time.  Place up to 5 wirew onto the disc of the wire twister, then attach these wires to a sturdy object.  Pull the wires taut, turn the crank & watch the wires twist.

Wire twister 14.50

Spiral Maker

New, easy way to create spirals.  Great for using when  you want to recreate the same size spiral.

Spiral Maker 15.75

Steel Bench Block. 

Perfect for flattening or hardening wire. 

Bench Block 12.50

Use to form, strengthen and flatten all types of wire. 2 1/2 inch face, 6 ounces

Rawhide Mallet 25.00

Flat head is used to flatten soft-tempered wires  Round head can be used for indenting wire and metal.  Use to strengthen and flatten all types of wire. Weighs 4 ounces

Ball Pien Hammer  4.00

Large Flat head is used to flatten soft-tempered wires  Round head can be used for indenting wire and metal.  Use to strengthen and flatten all types of wire. Weighs 6 ounces

Chasing Hammer  9.50

Used to cut memory wire or  hard temper wire.  The Beadalon memory wire shear has hardened 90 degree jaws that slice effortlessly through spring tempered wire leaving a clean, safe to handle straight  edge. 

Memory Wire Shears 17.50

Designed for cutting  wire and Beadalon 7, 19 and 49 and other soft lines.  Angled blades shear line without fraying and leave a smooth, clean edge.

Nipper  7.20

Choose from bent or straight tweezers.  Great for working with small beads

 

Bent Tweezers	4.45	Quantity Desired:
Straight Tweezers	4.50	Quantity Desired:

Designed to crimp Beadalon Crimp/Spacer beads and other crimping beads.  Lower position crimps and upper position rounds off crimped bead for a clean, professional look.  Leaves a smooth, round bead and eliminate sharp edges that can result from using conventional methods.

Crimper 12.50

Pin Vise

Perfect for twisting wire. Double grommet

Don't fumble with tiny Crimp Tubes any longer - use the right tool for the job!  Just like the standard Beadalon Crimp Tool, the Micro Crimper uses the lower section to crimp and the upper section to round off (only the chambers are much smaller).  You can use the Micro Crimper with our size 1 crimp beads and tubes.

Micro Crimper 12.50

Actually 3 tools in one.  Use this aluminum handled tool to enlarge, de-burr and round out bead holes.  Three different tips are included to fit bead holes from the smallest to 5.0. Each tip is coated with diamond dust for smooth, even reaming.  Tips store inside the tool.  Handy spring clip enables you to carry the tool in your pocket like a pen.  Replacement tips are available,

Bead Reamer 17.50

For the tiniest of holes in the most fragile beads.

Pearl Reamer 10.00

This tool fits on your finger just like a ring.  Use it to separate and hold a jump ring apart.  Cut down on fumbling and frustration.

Jump Ring Tool 2.00

Fill small plastic bowl half full of seed beads.  Insert big eye needle, spin bowl and watch the beads flow up the needle onto the thread. 

Seed Bead Spinner 7.00

Gray beading board has 3 channels for designing necklaces up to 38 inches (97 cm) with 6 storage bins for organizing beads, findings and stringing materials.  Board dimension are 9" (23cm) x 13" (53cm)

Bead Board 7.00

Use to remove the backs of watch faces so you can change the battery. Wooden handle

Watch face opener 3.00

Use to safely polish and clean all metal and stoned jewelry. Size is 8 by 5 inches.

Sunshine Cloth 3.60

3 inch triangular shaped bead trays are great for working with seed beads, other small beads and findings.   Sold in package of 12. 

Bead Trays 4.00

Bead Stopper

Use instead of an end bead to hold beads firmly on the thread while string.  Can support multiple strand pieces.   No more accidental spills while stringing.  Simply squeeze the end loops together to separate the coils of the Bead Stopper, clip it onto the end of your strand and release the end loops. Your Bead Stopper is now secured in place to eliminate accidental spills.  Comes in packages of 6 or 16.  CONTACT US ABOUT VOLUME DISCOUNTS ON THIS ITEM

Bead Stoppers  

A complete illustrated approach for beginner and advanced designers which explains how to use many stringing materials.  Well written and explanatory.  63 pages full of valuable information at an affordable price.

Book, Basics  6.50

Formulated to meet the high standards of crafters, E6000 is an outstanding adhesive!  Its thicker viscosity outperforms typical super glue.  When fully cured, this glue bonds tight, clear and is acid free.  Use the E6000 Glue Tip with E6000 for delicate applications and general craft purposes.  Available in a 3.7 ounce tube

Attach beads and pearls to Beadalon wire, Elasticity and SuppleMax neatly using G/S Hypo Cement.  The precision applicator allows you to place small quantities of glue inside beads without creating a mess.  Great for assembling "illusion" and "floating" designs with all types of beads.  The cement dries clear, will not bond fingers, and will not damage the surface to which it is applied.  Precision applicator eliminates waste.

GS Hypo Cement 4.60